Ici vous pouvez débattre de tous les sujets sous toutes ses formes... à condition qu'ils se rapportent un minimum à la photographie. Pour discuter de sujets sans rapport à la photographie, utilisez les sous forums.
stormpetrel a écrit :Ca a l'air pas mal du tout en effet!
vivement la 120
Ça dépend à quel prix!
Et puis 80 iso ce n'est pas énorme, et d'après ce que j'ai pu lire certains affirment que pour obtenir autant de détails dans les ombres qu'avec une FP4+, il faudrait l'exposer plutôt à 20 ou 40 iso...
... En 24x36 on a des optiques qui permettent d'ouvrir à 1.8 ou 1.4 si l'on veut, en moyen format je suis plus à l'aise avec une 400!
Le look un peu ortho me plaît beaucoup.... S'il faut utiliser le pied alors j'utiliserai le pied!
Pour le prix mais bon s'il faut soutenir Ferrania qui mouille la chemise, alors soit!
Utiliser le pied, quand on photographie les gens c'est pas l'pied!
Les soutenir c'est sur, j'espère que beaucoup de gens vont les soutenir, surtout en espérant qu'ils sortent d'autres films par la suite et que les prix baissent...
Edit: C'est incompréhensible, heureusement que le CM poste sur apug.
The longer story is that Parco Tecnologico - our "landlords" and a company set up by the regional government to develop the area - came to us late last year, acknowledging the problems that were left behind and promising to fix them.
Some time passed while they assessed the scope of work, and in January, they came to Nicola and Marco with a plan.
The first thing they did was fix our roof. Our "new" roof was installed in 2015, but it has been leaking in several places because the work was substandard. This is already fixed and up to spec.
The primary "to-do" is to re-address our internal power plant. Some elements must be swapped out to switch us from receiving power from Ferrania Technologies (the stopgap measure that has been in place since early 2016) to being connected to the regional grid.
Nicola mentioned that the upgrades will also prepare us to accept green energy sources in the future - basically allowing us to plug-and-play with solar panels, for instance. The green stuff is part of a larger regional initiative and could take some time before it's installed - but it will just be icing on the cake from our perspective.
The electrical stuff will take the longest to complete, and most of it requires the power to be off, as you can imagine. But they've worked out a schedule that allows production to resume after the most critical elements are installed/fixed.
All of this stuff is annoying and frustrating on a certain level. But a couple of people noted above, at the end of the day, this work is a very very good for us.
And as someone else pointed out, even after this work, our converting bottleneck will remain...
We have grown quite weary of trying to solve this issue with external partners. You would really not believe the lengths we have gone to find a workable solution. And we are most certainly not alone in this frustration because for all practical purposes, there is no solution that is readily available in the market at the quality and capacity we (and others) need.
This is of course why we have opened a round of investment. This first round will target our converting machinery for 135, 120, 127 and 16mm and includes our Kampf slitter, various perforators, and a few stand-alone support machines. The main cost is all of the labor necessary to prepare the spaces in the LRF, move the equipment, install it, and test it. But we've also included money to hire a few new staff to operate and maintain these machines, and to purchase a small amount of necessary raw materials. The capacity of these machines is such that we can offer contract converting to others who share our frustration AND make everything we could possibly need.
Si je comprends bien, le gouvernement ne veut plus investir. Donc ils demandent des investiseurs, minimum €5000.00. Pas de Kickstarter avec un peu de film comme retour mais tu devient actionnaire. J'ai déjà perdu €200.00 dedans, pour moi ça s'arrête ici.
1°/ Le gouvernement (de la région) fait face à ses obligations (désormais reconnues) dans le cadre du "parc industriel" où opère Film Ferrania et règle des problèmes d'infrastructure qui sont de sa responsabilité : étanchéité du bâtiment, autonomie de l'approvisionnement en énergie . Mais tout cela (le raccordement électrique en particulier) oblige à des interruptions d'activité.
2°/L'appel à des investisseurs (actionnaires) est destiné à permettre les acquisitions de matériel et les recrutements qui rendront Film Ferrania non tributaire de sous-traitants. C'est nouveau dans leur stratégie et ça résulte d'un constat fait ces derniers mois : pas de sous-traitant capable de satisfaire les exigences de Film Ferrania.
Libre à toi d'en être ou pas, mais il ne faut pas se livrer à de fausses interprétations. On a déjà bien assez de Facebook en matière de circulation de la désinformation, ne te joins pas au mouvement !
Ferrania peut enfin bobiner les cartouches de 35mm en interne
This is primarily because we have found a solution to move 35mm converting in-house immediately when production resumes!
We did not get the big automated 35mm line running (the price tag on that remains high), but we found an interim solution that is very workable. It pretty much accomplishes the same thing - removing the bottleneck - although it's not quite as "deluxe" as the fully automated line.
Je me demande pourquoi ils proposent pas du film en vrac par 10 ou 30 mètres, ça se faisait beaucoup à une époque. On trouvait du 10, 17 et 30 mètres, et même des films déjà à la longueur d'une 36 poses en pack de 3 ou 5... Charge au photographe de les bobiner dans des cartouches.
Je viens de relire le kickstarter original de il y a 4-5 ans maintenant. Ils était en train de fabriquer le film pour envoyer à ceux qui contribuait. Quelqu'un déjà reçu ce film?
Havoc a écrit :Je viens de relire le kickstarter original de il y a 4-5 ans maintenant. Ils était en train de fabriquer le film pour envoyer à ceux qui contribuait. Quelqu'un déjà reçu ce film?
et même si le film diapo est reporté, on était également supposés recevoir des breloques, c'est dommage qu'ils aient oublié ce point, çà aiderait à patienter pour le reste
We are also thrilled to say that we have secured the resources necessary to finally provide continuous production of P30 film with all processes done in-house.
Je viens du Kickstarter et ils ont ajouté quelque chose "for backers only" https://www.kickstarter.com/projects/fi ... ect_update Si quelqu'un se rapelle encore son mot de passe d'il y a 6 ans... Moi j'ai longtemps oublié.
Dites moi si je me trompe... ça fait 5 ans qu'ils dépensent de la thune pour cette usine et parviennent en même temps à se payer? Sans quasi avoir fait tourné l'usine? Et les investisseurs sont toujours là? C'est génial, pour moi c'est la preuve que l'argentique c'est encore l'avenir!
Hello Backers!
We have just published a new public update on our website. If you have a moment, please give it a read. We are finally, after so many years, ready to enter into continuous, uninterrupted film production. It’s going to take a couple of months of really intense work, but everything is in place.
This is of course only the first step toward delivering the original Kickstarter rewards that are now three years overdue.
Since we began this long journey together, we have fought through several devastating delays. Despite all logic, and some very dark moments, we have stubbornly refused to quit.
In all this time, we have not been able to reliably announce a timeline for delivering your original rewards. We have done our best to report on these delays and changes, as they have happened. But we also made too many guesses about our future that proved to be unrealistic. And rather than be unrealistic, we remained silent, which is also a problem.
We have read and understand the criticisms posted here and elsewhere. We have decided to make clear and important changes regarding all future updates.
REGULARITY: We commit to posting at least one update per month from now on.
ACCURACY: All updates will be about things that have actually happened in the factory (even if nothing has happened) and not about things that might happen.
EXCLUSIVITY: We will begin publishing some Backers-Only updates. We will use these private updates to give you advance notice, and any special instructions, ahead of all major announcements.
As our public update says, we have truly achieved a very important and long-overdue milestone for our company. We will emerge this fall in continuous production and using equipment that would have been destroyed if not for your pledge.
As we enter this new phase, we want our Backers to know that we would not be here today without you. We will do everything in our power to honor and respect your critical contribution.
We’ll talk to you again next month.